2-Way Passive speaker

1 x 15-inch LF cone, Vented box

1 x 1.4-inch HF compression driver on a rotatable CD asimmetrical horn

Tecnare V15, stage monitor and FOH 15 inches Loudspeaker, top left side


720 W AES / 1050 W continuous


8 Ohm


130,5 dB continuous/ 136,5 dB Peak


28,3 kg

The V15 is a lightweight, flexible and multipurpose loudspeaker enclosure, designed for use in mobile or fixed sound reinforcement, either as a main PA or as a stage monitor. The design includes a powerful 3-inch voice coil 15-inch LF speaker CAD tuned into a vented box, and a 1.4-inch exit (3-inch voice coil) HF compression driver coupled to an asymmetrical rotatable horn to provide a flexible coverage patterns and a smooth and clear high frequency reproduction.

Flying hardware provision, handles and a recessed floor stand socket are included as standard. The enclosure has been made with the latest techniques ensuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is coated with rugged Durawound texture finish and protected with specially treated grills.


  • High-Power  Multipurpose two-way system
  • 1 x 15-inch-LF/ 1 x 1.4-inch HF compression drive on CD rotatable asimmetrial horn
  • Integrate suspension points and pole mount cup


  • Highly intelligible vocal reproduction
  • Stand alone system
  • User-adaptable for both PA and stage monitoring applications
  • Background music in restaurant, disco, club.
Frequency Response: 42 Hz – 17 kHz ±4dB, measured on axys
Components: 1×15” LF driver, 1×1.4” HF driver on an asymmetrical exponential horn
Nominal Dispersion: 155 to 100º x 60°V@-6db points. Rotatable horn allows swap of horizontal and vertical pattern
Impedance: 8 Ohm
Axial Sensitivity: 101dB (1w/1m)
Calculated SPL: 130 dB continuous/ 136 Peak
Power Handling: 720 W AES / 1050 W continuous
Dimensions (HxWxD) (millimeters/inches): 715 x 445 x 395 (mm) 28.15” x 17.5” x 13.34”
Net Weight (kg/Pounds): 28,3kg. (62.40lbs.)
Construction: 16mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating.                  One recessed carrying handle
Powder coated perforated steel with acoustically transparent reticulated foam


  • Accessories:-Color Versions:
    • White color
    • Black color

    – TUB-V15 + LPV15


    • V-15 A. DSP Fixer on factory
    • V-15 PCC-3 Network controlled DSP

Highly intelligible vocal reproduction

Stand alone system

Dual use main/monitor two-way system

Background music in restaurant, disco, club.



















V15 1

Stage Monitor & Front of House Configuration

Front of House Configuration:

Good coverage of audiences often requires a conflicting combination of wide coverage (“short-throw”) for the closest listeners (below cabinet axis) and narrow coverage (“long-throw”) for distant areas (on or above axis). The V12 and V15 loudspeaker horizontal horn coverage varies from “shortthrow” to “long-throw” along the vertical axis to precisely match these practical requirements in a single system. For the majority of applications, the asymmetrical horn should be used with its “wide” dispersion side directed towards the floor, but all four cabinet orientations are usable.

Tecnare V Series Coverage draw

Stage Monitor Configuration:

For stage monitors the required coverage is always wider when performers are close to the wedge (above the horn axis) than when they move away from it (below the horn axis). For floor monitor use the horn must be rotated with its “wide” dispersion side directed towards the top of the cabinet in wedge position as shown in the below figure.
The specific dispersion pattern, the HF driver and the very high power handling all contribute to the exceptional performance of the V Series as a wedge monitor.

V15 2

V15 Accessories

V15 3
TUB-V15 + LPV15

U-Bracket for V15 Loudspeaker + LPV15 adapter plate

V15 4
HG-1 Universal Bracket

• Manufactured from extruded Aluminium.

• Mounting holes from M8 to M10 screws.

The HG-1 Universal rigging bracket is time-saving rigging solutions that provide a safe method of securing loads at ceiling or truss.

Once anchored, they provide a simple and reliable method for aiming loudspeakers.

HG-1 is secured to the ceiling or truss throug a threaded hole to attached it a clamp truss or ceiling embedded screws.

V15 5
Wall Mount for speaker with
35mm flange mounting and
tube with ø35mm

Related Products