Tanit Series 1

The TANIT Loudspeaker is a hi-Performance 2-way passive arcuate line source column enclosure designed for professional sound reinforcement.

TANIT is equipped with six 5” MF cone drivers mounted in a vented enclosure, three above and three below the HF section and two 1” (1.5” voice coil) HF drivers attached to a waveguide and coupled to an exponential horn. The AES power capacity is 1040W at the nominal 6 ohm impedance.

The usable system bandwith is 85Hz to 18kHz. The precise polar pattern of 120ºH 30ºV (+5º/-25º) is achieved through the progresive acoustics coupling slighty arcuate ensuring a precise audience coverage, improved sound quality and outstanding speech intelligibility are assured.

The TANIT loudspeaker have got a maximum SPL 134dB (peak level measured at 1m under free field conditions using pink noise with crest factor 6).

TANIT and TANIT SUB system is particularly suitable for individual applications up to a distance of 25 metres.

Cabinet constructed of first grade birch plywood. A steel grill protect the front of enclosure and backed by an acoustically neutral fabric is fixed on the back. Finish in polyurea coating and custom RAL code on special order.

The enclosure feature different integrated rigging inserts and safety insert. Accesories for flying, wall-mounting, pole mounting and stacking the enclosure are available.It is equipped with two 4-point speakON© connector at the rear. The enclosure can be mounted on companion subwoofer for reinforced extended the low frequen- cy bandwith. Power is routed through the subwoofer to the AutoConnect panel on the bottom of enclosure.

The TANIT loudspeaker includes a passive crossover network and is designed to work with a dedicated preset configuration. It shoud be used only with a Tecnare Processor/TSeries Amplifier.

The TANIT SUB is a passive/active high-power vented subwoofer housed with two 12″ drivers in a compact enclosure designed to work altogether with TANIT Line Source Column.

The subwoofer is connected via 4-points speakON® connector. The Powering mode can be switched for passive operation using the internal passive crossover network or active through a dedicate preset. Selfpowered version is also available.

Tanit Sub feature Autoconnect panel on top for stacking and connecting the companion TANIT Line Source Column enclosure. The AES power capacity is 1800W at the nominal 8 ohms impedance. The low frequency limit is 35 Hz.

The TANIT SUB loudspeaker have got a maximum SPL 137dB (peak level at 1m under half-space conditions using pink noise with crest factor 6). Cabinet constructed is made out of first grade birch plywood. A steel grill protect the front of enclosure and backed by an acoustically neutral fabric is fixed on the back. Finish in polyurea coating and custom RAL code on special order. Each side panel incorporates a rigid metal handle.

The TANIT SUB is designed to work with a dedicated preset configuration. It shoud be used only with a Tecnare Processor/TSeries Amplifier.

•Concert & Live Events

•Place of worship

•Convention centres

•Auditorium & Concert Halls

•Theaters

•Large congregations

• Visually Discreet

• Lightweight

• Plug & Play package

• Mounting accessories

TANIT Column Loudspeaker

Frequency Response 75 Hz – 20 kHz*
Frequency Response: Free Field 85 Hz – 18 kHz ±3 dB
SPL (1m) 128 dB SPL
Maximum Peak SPL 134 dB SPL
Transducers: Low/High Frequency 6 x 5″ custom made neodimium cone drivers and 2 x 1” neodimium compression drivers
Sensitivity (1W/1m) 98dB
Dispersions (HxV) Asymmetric 120º x 30º (+5/-25)
Recommended amplifiers PA3000/PA5000/T20-44/T10-44/T10-48
Power (AES)** 1040 W
Power (Cont.) 2080 W
Rate Impedance 6 Ω
AutoConnect on the bottom, 2xNL4 on the back Input Connectors
NET Weight 23 kg (50.7 lbs)
Dimensions 1274,5 x 165,5 x 230,3 mm ( 50.18” x 6.40” x 9.07”) (HxWxD)
Construction 10mm first grade birch plywood. Finished in black semi-matt textured Polyurea coating
Protective Grille Powder coated custom perforated steel with acoustically transparent reticulated fabric.

TANIT Sub

Frequency Response 35 Hz- 195 Hz*
Frequency Response: Free Field 45Hz- 120 Hz±3 dB
SPL (1m) 131dB SPL
Maximum Peak SPL 137 dB SPL
Transducers: Low/High Frequency2 x 12″ neodimium cone drivers
Sensitivity (1W/1m) 96dB @half-space
Dispersions (HxV) 360
Recommended amplifier PA3000/PA5000/T20-44/T10-44
Power (AES)** 1800 W
Power (Cont.) 3600 W
Rate Impedance 8 Ω
AutoConnect on the top, 2xNL4 on the back Input Connectors
NET Weight 31,5 kg (69,44 lbs)
Dimensions 825 x 348 x 423,3 mm ( 32.48” x 13.71” x 16.67”) (HxWxD)
Construction Extrude and solid aluminum construction. Black or white texture powder-coated
Protective Grille Powder coated custom perforated steel with acoustically transparent reticulated fabric