Passive Wooden Column Loudspeakers

TS Series

Tecnare TS Series are a new Range of Tower Loudspeaker Series, specially designed for installations, were high definition and fashion design were required.

tecnare ts series

MAIN APPLICATIONS

Tecnare TS Series are specially developed for every kind of sound installations. With a very fashionable design, this range of loudspeakers fit with every architectural structure.

Public Adress Installations

Hotels & Convention Centres

Place of Worship

ts 635

TS-635

The Tecnare TS-635 is a cost-effective-high-quality column speaker, in a wooden cabinet and houses six 3.5-in loudspeakers which generate a frequency bandwidth response 150-15kHz.

These stylish 8-ohm loudspeakers with an incredibly dynamic and complete sound are a well-suited for medium-sized mainly speech applications where clear, uniformly dispersed sound that is audible at a distance is essential, such as conference centres, houses of worship or venues with highly reflective interior surfaces and at the same time, in combination with any Tecnare subwoofer, an optimised music reproduction of the full range.
Wall mount supports / brackets included

z

200 W (AES) / 400 W (Continuous)

118 dB continuous /124 dB peak

g

8 Ohm

8 Kg

Specifications

*Frequency Response¹ 150 Hz – 15 kHz
*Frequency Response: Free Field 155 Hz – 15 kHz ±3 dB
*Maximum Peak SPL 118 dB SPL
*Dispersions (HxV) Symmetrical 150° x 12º
*Transducers: Low/High Frequency 6 x 3.5″
*Sensitivity (1W/1m) 95 dB
*SPL (1m)  124 dB SPL
*Recommended amplifier  DVA4x500, Xit4, T-Series
*Power @8Ω²  200 W (AES) / 400 W (Continuous)
*Impedance 8 ohm
*NET Weight 8 kg (17,64 lbs)
*Dimensions (HxWxD) 603 x 125 x 140 mm (27,74” x 4.92” x 5.51”)
*Input Connectors 2 x NL4 connectors
*Construction 16mm birch plywood. Finished in brown paint. Recesed Carrying on the back
*Protective Grille Powder coated custom perforated steel with acoustically transparent reticulated foam
¹ Recommended maximum operating range. Response depends on loading conditions and room acoustics
² Based on AES Standard, 2 hours test applying 6dB crest factor pink noise signal withing the range Fs-10Fs (AES-1984)

TS-935

The Tecnare TS-935 is a cost-effective-high-quality column speaker, in a wooden cabinet and houses nine 3.5-in loudspeakers which generate a frequency bandwidth response 150-15kHz.
These stylish 8-ohm loudspeakers with an incredibly dynamic and complete sound are a well-suited for medium-sized mainly speech applications where clear, uniformly dispersed sound that is audible at a distance is essential, such as conference centres, houses of worship or venues with highly reflective interior surfaces and at the same time, in combination with any Tecnare subwoofer, an optimised music reproduction of the full range.

tecnare tower speaker, ts83 left view
z

300W (AES) / 600W (Continuous)

121dB Continuous/121dB peak

g

8 Ohm

11 kg

Specifications

*Frequency Response¹ 150 Hz – 15 kHz
*Frequency Response: Free Field 155 Hz – 15 kHz ±3 dB
*Maximum Peak SPL 121 dB SPL
*Dispersions (HxV) Symmetrical 150° x 12º
*Transducers: Low/High Frequency 9×3.5″
*Sensitivity (1W/1m) 97 dB
*SPL (1m) 127 dB SPL
*Recommended amplifier DVA4x500, *Xit4, T-Series
*Power @8Ω² 300 W (AES) / 600 W *(Continuous)
*Impedance 8 ohm
*NET Weight 11 kg (24.25 lbs)
*Dimensions (HxWxD) 892 x 125 x 140 mm (35.12” x 4.92” x 5.51”)
*Input Connectors 2 x NL4 connectors
*Construction 16mm birch plywood. Finished in brown paint. Recesed Carrying on the back
*Protective Grille Powder coated custom perforated steel with acoustically transparent reticulated foam
¹ Recommended maximum operating range. Response depends on loading conditions and room acoustics
² Based on AES Standard, 2 hours test applying 6dB crest factor pink noise signal withing the range Fs-10Fs (AES-1984)

Tecnare Tower Speaker TS24, front view

The TS24 is a public address lightweight AL profile loudspeaker, specially designed to be a cost-effective solution column array line, consisting of a kit of four enclosures, each one formed by two weather
treated 4″ transducers.
This is the ideal solution for short or medium range environments with demanding acoustics where speech intelligibility is a primary concern.
With rugged powder coated lightweight aluminium construction, steel hardware, has been designed to be a cost-effective solution for multiple applicationsInstallers will appreciate the quick-hang ceiling, flying system, especially designed for mounting four elements of TS24.
Mounting bracket supplied. Using these mounting brackets, the cabinets can be flown and mounted on any ceiling, or other position, while aiming the loudspeakers into the desired angle.
The input plate comes with a Neutrik HRJ4HH-1, 1/4″ jack connector or can be chosen for a wire sealing gland nut for direct cable attachments to be used in outdoor installations.

z

60 W (AES) / 120 W (Continuous)

112 dB SPL/ 118 dB Peak

g

8 Ohm

2,5 kg (5.51 lbs)

Specifications

Frequency Response:                                                                88 Hz – 20 kHz

Frequency Response: Free Field                                            90 Hz – 18 kHz ±3 dB

SPL (1m)                                                                                        112 dB SPL

Maximum Peak SPL                                                                   118 dB SPL
Components:                                                                                2 x 4″ + 1 x 1”

Sensitivity (1W/1m)                                                                    97 dB

Dispersions (HxV)                                                                       Symmetrical 120° x 30º

Recommended amplifier                                                          Xit4, T-Series

Power (AES)                                                                                 60 W (AES) / 

Power (Cont.)                                                                              120 W (Continuous)

Impedance:                                                                                   8 Ohms

Input Connectors                                                                       2 x HRJ4HH-1 connectors or sealing gland nut block

Dimmensions (HxWxD) (millimeters/inches):                  308 x 126 x 94 mm (12” x 5” x 4”)

(19.05” x 4.57” x 3.41”)

Net Weight (kg/Pounds):                                                              2,5 kg (5.51 lbs)

Construction:                                                                                  Extruded aluminium profile, textured powder coating.
Grille:                                                                                                  Powder coated custom perforated steel with acoustically                                                                                                    transparent reticulated foam

Tower Speakers 1

TS Series

Commercial Design: Stylish Finish

16mm birch plywood. Finished in brown paint. Recesed Carrying on the back Protective Grille Powder coated custom perforated steel with acoustically transparent reticulated foam.

 

Brackets Included

Wall mount supports / brackets included.

Aluminium Brackets. Easy to handle and Install.

ts series back