TS-24

Passive Full Range PA Loudspeaker

• 2 x 4” + 1 x 1” Loudspeakers
• 8 Ω nominal impedance

z

60 W (AES) / 120 W (Continuous)

112 dB SPL/ 118 dB Peak

g

8 Ohm

2,5 kg (5.51 lbs)

 

The TS24 is a public address lightweight AL profile loudspeaker,
especially designed to be a cost-effective solution column array line,
consisting of a kit of four enclosures, each one formed by two weather
treated 4″ transducers.
This is the ideal solution for short or medium range environments with
demanding acoustics where speech intelligibility is a primary concern.
With rugged powder coated lightweight aluminium construction, steel
hardware, has been designed to be a cost-effective solution for
multiple applicationsInstallers will appreciate the quick-hang ceiling,
flying system, especially designed for mounting four elements of TS24.
Mounting bracket supplied. Using these mounting brackets, the
cabinets can be flown and mounted on any ceiling, or other position,
while aiming the loudspeakers into the desired angle.
The input plate comes with a Neutrik HRJ4HH-1, 1/4″ jack connector or
can be chosen for a wire sealing gland nut for direct cable attachments
to be used in outdoor installations.

MAIN FEATURES

• Compact full range passive system
• 2 x 4” + 1 x 1” Loudspeakers
• Cost-effective solution for installations
• Mounting accessories

Frequency Response:                                                                88 Hz – 20 kHz

Frequency Response: Free Field                                            90 Hz – 18 kHz ±3 dB

SPL (1m)                                                                                        112 dB SPL

Maximum Peak SPL                                                                   118 dB SPL
Components:                                                                                2 x 4″ + 1 x 1”

Sensitivity (1W/1m)                                                                    97 dB

Dispersions (HxV)                                                                       Symmetrical 120° x 30º

Recommended amplifier                                                          Xit4, T-Series

Power (AES)                                                                                 60 W (AES) / 

Power (Cont.)                                                                              120 W (Continuous)

Impedance:                                                                                   8 Ohms

Input Connectors                                                                       2 x HRJ4HH-1 connectors or sealing gland nut block

Dimmensions (HxWxD) (millimeters/inches):                  308 x 126 x 94 mm (12” x 5” x 4”)

(19.05” x 4.57” x 3.41”)

Net Weight (kg/Pounds):                                                              2,5 kg (5.51 lbs)

Construction:                                                                                  Extruded aluminium profile, textured powder coating.
Grille:                                                                                                  Powder coated custom perforated steel with acoustically                                                                                                    transparent reticulated foam

 

Accesories:

  • Wall mount supports/brackets included.

 

R
Public address installation
R
Place of worship
R
Convention centres
R
Hotels