HIGH-Q POINT SOURCE 15″ ARRAYABLE LOUDSPEAKER
ALIS15
2-Way Bi-amped Enclosure
1 x 15-inch neodymium LF cone drive, vented box
1 x 1.4-inch exit (3-inch voice coil) compression driver, attached to a CD Horn.

Power
1110 W AES / 2200 W continuous
Impedance
LF: 8 Ohm / HF: 16 Ohm
SPL
134 dB continuous. 140 dB peak
Weight
42 Kg
ALIS15 R2 – Full-Range Arrayable Point Source Speaker with Constant Curvature for Professional Sound Applications
The ALIS15 R2 is the second-generation evolution of Tecnare’s acclaimed Adaptive Loudspeaker Integrate point Source Series. This high-performance 2-way full-range speaker delivers a constant curvature wavefront of 40º x 75º, ensuring consistent directivity and outstanding audio coverage across a wide variety of venues and installation scenarios.
Engineered for exceptional scalability, the ALIS15 R2 can be deployed as a single unit or as part of compact arrays of two, three, or four cabinets, depending on the acoustic needs of the space. Each array maintains precise polar control and consistent phase response, making it an ideal choice for distributed audio systems in auditoriums, theaters, sports arenas, and multipurpose venues.
Arrays can be flown vertically or horizontally, or ground-stacked when necessary. Thanks to its fixed mechanical design, no angle calculations or manual spread adjustments are required—offering a fast, reliable setup every time. This not only reduces the margin for error but also ensures predictable, high-quality results in every application.
Whether you’re designing a high-output low-distortion sound system for speech, music, or complex multimedia environments, the ALIS15 R2 delivers outstanding clarity, dynamic range, and sonic precision.
To maximize performance, the ALIS15 loudspeaker is optimized for use with Tecnare’s T Series Class D amplifiers or the DP4896 digital signal processor, which provides precise presets and advanced DSP algorithms for crossover, EQ, and limiter functions. This integrated approach ensures that every ALIS15 deployment reaches its full acoustic potential—without the need for external processing or time-consuming configuration.
Robust Construction for Long-Term Performance
The ALIS15 R2 enclosure is built from high-grade WISA birch plywood and finished with a tough polyurea-based hard-shell coating that provides superior durability, scratch resistance, and weather protection. The lightweight aluminum rigging hardware not only minimizes total system weight but also enhances corrosion resistance, making the ALIS15 suitable for both indoor and outdoor installations.
A passive version of the ALIS15 R2 is also available, featuring a high-quality internal passive crossover network—perfect for installations where external processing is limited or a more streamlined setup is preferred.
Key Features of the ALIS15 R2:
-
Second-generation 2-way full-range point source loudspeaker
-
Constant curvature wavefront: 40º horizontal x 75º vertical
-
Scalable arrays: fly or stack 2, 3, or 4 cabinets
-
Fixed mechanical angle – no manual spread adjustments required
-
Exceptional polar control, high SPL output, and low distortion
-
Works seamlessly with DP4896 DSP and T Series Class D amplifiers
-
Constructed from premium WISA birch plywood with polyurea coating
-
Lightweight aluminum rigging system – weather-resistant and portable
-
Available as a passive speaker with internal crossover
Features
- Exceptional size-to-power ratio; easily powerful enough to use for main system, delay stacks, or fill duties
- 1 x 15-inch-LF cone driver / 1 x 1.4-inch exit (3-inch voice coil) HF compression driver coupled to a constant-Q horn
- Plug-and-play package, quick set-up and easy flying
Applications
- Theatres and theatrical sound reinforcement
- Stand alone system
- Drumfill, Center and Sidefill applications
- Concert Halls, distributed systems and clubs
Frequency Response: | 48 Hz – 20 kHz ±4dB, measured on axys |
Components: | 1×15” neodymium LF driver 4” voice coil, 1×1.4 ’’ neodymium HF compression driver |
Nominal Dispersion: | 40º x 75° @-6dB |
Impedance: | LF: 8 Ohm / HF: 16 Ohm |
Axial Sensitivity: | 107 dB |
Calculated SPL: | 134 dB continuous / 140 dB peak |
Power Handling: |
1100 W AES / 2200 W continuos *LF power:1000 W AES @8ohm *HF power: 100 W AES @16ohm |
Dimensions (HxWxD) (millimeters/inches): | 800 x 450 x 755,5 mm / 31.49″ x 17.71″ x 29.74″ |
Net Weight (kg/Pounds): |
42 Kg / 92.59 lbs |
Construction: | 16mm birch plywood. Finished in black semi-matt textured. Polyurea weatherized coating. One recessed carrying handle. |
Grille: | Powder coated perforated steel with acoustically transparent reticulated foam. |
Passive crossover network
Accessories:
◊Colors Versions:
-White color
-Black color
- Pickup plate: THV-ALIS15
- Pickup plate: THF-ALIS15 Array frame for 2 units
- Top Grid: TTG-ALIS15
- Wooden dolly TWD-ALIS15
- TecB004 Load Spreader Bar
- Soft Cover for ALIS15
Theatres and theatrical sound reinforcement
Stand alone system
Drumfill, Center and Sidefill applications
Concert Halls, distributed systems and clubs
Horizontal & Vertical Array Rigging
The ALIS15 offer extremely easy to use rigging, making the system highly versatile from touring, rental and fixed installations. ALIS15‘s sides include a couple of aluminium rail that allow the unit to be easily linked with other ALIS15s in arrays by means of TALBX15 bar.
The optional THVALIS15 pickup plate allows lifting ALIS15 horizontal arrays of up to four units with uptilt or downtilt from a single hanging point; two pickup plates can lift arrays of up to six units from a single hanging point or motor using the TecB004 Universal Fly bar. The Optional THFALIS15 plates to join the units in fixed installations are available.
The Optional TTGALIS15 bar suspends vertical arrays of up to six ALIS15s.
The Optional TA15SMB pole socket mounting bracket allows using one ALIS15 on pole mounted on a subwoofer or standard loudspeaker tripod stand.
Other options include weather protection and custom colour finishes for fixed installations and applications with specific cosmetic requirements, TWDALIS15 wooden dolly board for moving the enclosure and protecting the front grill during transport and storage.
ALIS15 Accessories
THV-ALIS15
Pickup Array Plate for ALIS15 Loudspeakers
THF-ALIS15
Array Frame for rigging cluster of 2 ALIS15 Loudspeakers
TALBX15
Coupling Bar for ALIS15 loudspeakers
TTG ALIS15
Top Rigging Bar for ALIS15 Loudspeakers
TWD-ALIS15
Wooden dolly to transport a ALIS15 Loudspeaker
TecB004
Load Spreader Bar. Suspends
two THV-ALIS12 or THVALIS15 pickup plates from a single point for hanging arrays of up six ALIS12s or ALIS15s.
TSM-ALIS15
Pole Mount Bracket. Stand
adapter allows to ALIS15 to
be mounted onto a 35mm
(3/8”) diameter pole. It must
be ensured that the speaker
stand is capable of support
the weight of assembly