HIGH-POWER EXTENDED BASS SUBWOOFER
SW218EB 2600
Double 18-inch
2 x 18-inch LF cone driver, Vented Subwoofer
Power
2600W AES / 5200W continuos
Impedance
4 Ohm
SPL
138 dB continuous /144 dB peak (T-20 Amplifier)
Weight
93,5 kg
The SW218EB2600 is a high performance loudspeaker defined by its exceptional headroom and an extended frequency
response.
The SW218EB2600 housing two linear, high excursion 18-inch cone drivers mounted in a vented cabinet and optimally tuned port with flared ends to reduce turbulence and noise under high drive conditions.
The loudspeakerís 30Hz to 150Hz operating frequency range allow it to integrate with any Tecnare Loudspeaker System.
The subwoofer cabinet is constructed of first grade birch plywood and has a high-quality Polyurea paint finish. The front of the subwoofer is protected by a hex-stanmped, steel grille backed by an acoustically transparent foam.
Two ground runners to protect the botton allow stacking the subwoofer in horizontal and vertical position. The subwoofer shall be connected via one 4 point speakON
Features
High output Subwoofer
2 x 18” LF long excursion Hi Power drive
Bass reflex system
140 dB max SPL
4Ω Nominal Impedance
Applications
Stadium
Club sound reinforcement
Sound system rental
Arenas
| Frequency Response: | 30 Hz – 150 kHz |
| Components: | 2 x 18-inch LF cone driver (4.5” VC) |
| Nominal Dispersion: | 360º (Only one box. Varies with number of units and configuration) |
| Impedance: | 4 Ohm |
| Axial Sensitivity: | 101 dB |
| Calculated SPL: | 138 dB cont. / 144 dB peak (With T20-44 amplifier) |
| Power Handling: | 2600W AES / 5200W continuos |
| Dimensions (HxWxD) (millimeters/inches): | 546x1340x700 mm / 22.10″ x 52.75″ x 27.56″ |
| Construction: | 18mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. Two recessed carrying handle |
| Net Weight (kg/Pounds): | 93,5 kg. / (199 lbs) |
| Grille: |
Powder coated perforated steel |
- Accesories:◊Colors Versions:
-White color
-Black color- 100 mm rotating wheels
- FUND-218EB Protective transit soft covers for one SW218V. Other configurations are available upon request
- Rigging Kit
- THV-SW218EB Top Grid
Stadiums / Sport Arenas
Club sound reinforcement
Sound system rental
Touring & Live Events
SW218EB2600 Accessories
THV-218EB
Top Grid from SW-218EB. Allows up to 10 SW-218EB Subwoofer
TRK-218EB
Rigging Hardware kit from SW-218EB Subwoofer
TWD-218EB
Wooden Transport Dolly from SW-218EB. Allows transport up to 3 SW-218EB Subwoofer
TCF-218EB
Caster Frame from SW-218EB. Allows transport up to 4 SW-218EB
TWB-218EB
Woodenboard from SW-218EB. Allows transport a SW-218EB loudspeaker
SW218EB600 Cardioid Operation
SW218EB2600 subwoofer can be configured in cardioid arrays to reduce the amount of output heard behind the subwoofers. Subwoofer cardioid arrays are archived by placing three units coplanar to each other with one unit facing the opposite direction. The output of the reversed subwoofer cancels the output of the other subwoofers normally present behind the units.
Tecnare has speciû cally designed cardioid presets (SW218EB_i, SW218_80i and SW218_70i). However, we recommend calculating the appropriate ratio of forward to rear facing loudspeakers, as well as the measurement of required parameter setting of polarity, delay, and gain. For more information, contact Tecnare Technical Support.
Related Products
SW12
SW115
SW118H
SW118M
SW18VR
SW215
SW218V
SW218EB 2600
SW218EB
SW221
SUBS
