510 W AES / 1020 W continuous
134 dB continuos / 140 peak
LF: 8 Ohm / HF: 16 Ohm
The Tecnare CLa208 array is an extremely compact high output, lightweight enclosure housing two 8-inches speakers, and one 1.4-inches compression driver attached to a waveguide device. The system can be supplied in active Pcc version or passive one. The active PCC version has an output connector to power one passive CLa208 box.
The CLa208 Array delivers extended bass response and well balanced clean mids and highs. High frequency is handled by one 3-inches voice coil, 1.4-inches exit compression driver attached to a 110ºx10º wave guide. The system’s shape is trapezoidal, so we can better angle and focus it’s elements. This feature could partially solve front fill applications, if the front fill focused elements could be managed independently a part from the other elements of the array. This can be done with the active CLa208 Array versions, as each loudspeaker, or group of 2 speakers, are individually DSP controlled by it’s own digital processor. This performance give us the possibility to program air absortion correction, modified eq’s and gain for front fill situations, directivity control… and all the parameters we need to optimize the overall performance.
The CLa208 Array has built in proprietary hardware for simple, fast and safe rigging. The enclosure has been made with the latest techniques assuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is covered with rugged Durawound texture finish and protected with epoxy powder coating grills.
The system’s choice can be passive (CLa208), and self-powered without networking (CLa208A) or with networking remote PC control (CLa208 PCC-3).
- Ultra-Compact two-way curvilinear array module
- 2 x 8-inch-LF cone, dipolar shape / 1 x 1.4-inch (3-inch voice coil) mounted on one waveguide
- Exceptional pattern control due to symmetrical design.
- Touring sound, sports arenas
- Near-field applications
- hotel ballrooms live clubs and disco
- corporate A/V, performing arts centers
Components: Low 2×8”; High 1×1.4” exit compression driver
Coverage Angle: Horizontal: 110º; Vertical: depending on array length and configuration
Impedance: LF: 8 Ohm / HF: 16 Ohm
Axial Sensitivity: 107 dB (1w/1m)
Calculated SPL: 134 dB continuos / 140 peak
Power Handling: 510 W AES / 1020 W continuos
– LF power: 400W AES @8ohm
– HF power: 110W AES @16ohm
Dimmensions (HxWxD) (millimeters/inches): 295,5x602x455 mm / 11.63″ x 23.70″ x 17.91″
Net Weight (kg/Pounds): 29,3 kg. / 64.59 lbs.
Construction: 16mm birch plywood. Finished in black semi-matt textured Polyurea weatherized coating. One recessed carrying handle.
Grille: Powder coated perforated steel with acoustically transparent reticulated foam.
(1) Standard mode (CLa208 preset) / CUT mode (CLa208_80 preset)
- White color
- Black color
-Multipurpose Top Grid: THV-208
-Transition Frame CLa208 to SW118M: TTF-118-208
-Transition Frame CLa21 to CLa208: TTF-Cla21-208
– TSMB-CLa208 Rigging plate for pole-mount of 2 CLa208
-Wooden dolly CLa208: TWD-208
-Three-high CLa208 Transit Cover: Covers three stacked
-Four-high CLa208 Transit Cover: Covers Four stacked
- CLa-208 A. DSP Fixed on factory
- CLa-208 PCC-3 Network controlled DSP