High Power compact point source loudspeaker
IK26
2-way passive system
2 x 6,5″ + LF drive
+ 1,75″ diaphragm, 1″ HF driver coupled with a rotatable 80º x 60º constant-Q horn
Power
450W AES / 900W continuos
Impedance
8 Ω
SPL
127dB cont./133 dB pico
Weight
11,5 kg
Tecnare’s iK26 design extends to the point source technology to a smaller version for size- and weight-critical applications.
Its a concentric driver configuration has all the benefits of a coaxial driver, yet none of the disadvantages.
The K-shaped geometry design, features a symmetrical dual 6,5″ LF drive arrangement, vented enclosure and a 1,75″ diaphragm, 1″ HF driver coupled with a rotatable 80º x 60º constant-Q horn designed for very precise, even coverage. This horn design, in conjunction with the concentric driver configuration, delivers the same pattern regardless of orientation.
The iK26 includes two integral M8 rigging points on each end to enable a variety of configurations including those requiring pole mounting, hanging individually from a single point, wall mounting or ceiling mounting.
In addition, the iK26 features two rear threaded M8s for use with third-party wall brackets. The cabinet is coated with rugged Polyurea texture fnish and protected with special grille. Other options include weather protection and custom color finishes.
Features
- Compact two-way passive system
- Wide pattern coverage broad area
- Rotatable horn
- Mounting accessories
Applications
- Multi-purpose AV
- Rental, Theater, Retail Spaces
- Convention centres
- House of worship
- Distibuted, Fill and Bajo Balcony
| Frequency Response¹ | 80 Hz – 18 kHz |
| Frequency Response: Free Field² | 90 Hz – 18 kHz ±3 dB |
| Axial Sensitivity @(1W/1m) | 101 dB |
| Calculated SPL | 127dB cont./133 dB peak |
| Transducers: Low/High Frequency | 2 x 6 ½” cone drivers + 1 x 1” compression driver. Vented enclosure |
| Dispersions (HxV) | 80° x 60º |
| Recommended amplifier | PA2100/T6-44 |
| Power (AES)³ | 450 W |
| Power (Continuous) | 900 W |
| Rate Impedance | 8 Ω |
| Input Connectors | IN: 1xNL4 SpeakON® LINK: 1 X NL4 SpeakON® |
| NET Weight | 11,5 kg (25,35 lbs) |
| Dimensions | 466 x 208 x 272 mm/ (18.35” x 8.19” x 10.7”) (HxWxD) |
| Construction | 16mm birch plywood. Finished in black semi-matt textured Polyurea weatherized coating. |
| Protective Grille | Powder coated perforated steel with acoustically transparent reticulated foam |
Multi-purpose AV
Rental, Theater, Retail Spaces
Convention centres
House of worship
IK26 Accessories
HG1
Manufactured from extruded Aluminium.
• Mounting holes from M8 to M10 screws.
The HG-1 Universal rigging bracket is time-saving rigging solutions that provide a safe method of securing loads at ceiling or truss.
Once anchored, they provide a simple and reliable method for aiming loudspeakers.
HG-1 is secured to the ceiling or truss throug a threaded hole to attached it a clamp truss or ceiling embedded screws.
HG2
The HG-2 Universal rigging bracket, allows fixing loudspeakers to wall or ceiling. The speaker bracket’s angle can be quickly and easily adjusted to ensure an optimal coverage. Its mounting holes guarantee compatibility with almost of loudspeaker, specially Tecnare E Series, up to 50kg (110.3 lbs.) in weight to a wall or ceiling.
TUB-iK6
U-bracket for iK26. Black
Related Products
IBZA6
IBZA6PLUS
IBZA6HZ
IBZAIK26
IBZA8
IBZA10
IBZA12
IBZA15
IBZA
