4 x 1670 Watt @ 4 ohm / 4 x 1220 Watt @ 8 ohm / 2 x 4000 Watt @ 8 ohm Bridge
Frequency response, 4 Ohm load 20kHz, 4 Ohms, +/- 1dB
8 kg (17.63 pounds)
The two models of four channels in the series are the PA4.450 band PA4.1500.
PA4.1500 is a 4 channel power amplifier that delivers up to 4 x 1670 W RMS @ 4 (2×4000 W RMS bridged @ 8 ), weighing just 8 kg.
It features independent gain knobs, signal clip and fault LEDs, stereo XLR input, 1.4 V to 0.775 V input sensitivity switch, mono – parallel – bridge switch, speakON® outputs.
Moreover, it is protected against shorts and open circuits. Thanks to its high efficient heat sinks and high speed DC fans, the PA4.1500 can withstand the hardest heat conditions ensuring great reliability.
- Easy to configure in stereo / mono / bridge modes
- Two unit 19″ rack.
- Front panel signal / clip / protect LED indicators
- Extensive protective circuits ensure high reliability and operating safety
- XLR-3 input connectors / SPEAKON® NL4 output connectors
- Small and medium size PA systems
- Disco, club and DJ sound
- TECNARE systems
- Public Spaces
- Mobile and fixed installation
Power Output, all channels driven (RMS) 4 x 1670 Watt @ 4 ohm / 4 x 1220 Watt @ 8 ohm / 2 x 4000 Watt @ 8 ohm Bridge
Voltage Gain 37.8 dB
Frequency response, 4 Ohm load <20Hz to >20kHz, 4 Ohms, +/- 1dB
Inter‐channel crosstalk, worst case combination better than ‐75dBr at 1kHz and ‐58dBr at 20kHz
Total harmonic distortion, THD <0.5%, 20Hz-20kHz
Operation voltage 180-250 V (50/60 Hz)
Power consumption 1850 W
Audio Input Analog: 4x female NeutrikTM XLR-3
Amplifiers output 4x Neutrik SpeakonTM NL4 connectors
Protection Protection against short circuits, no-load, on/off muting, RF interference.
Ventilation Flow-through ventilation front to back
Enclosure Standard 19” 2U (88mm), 331mm (13.03”)
Net Weight 8 kg (17.63 pounds)