A.L.I.S 12

ARRAYABLE LOUDSPEAKER
  • 2-Way Bi-amped Enclosure

  • 1 x 12-inch neodymium LF cone drive, vented box

  • 1 x 1.4-inch exit (3-inch voice coil) compression driver, attached to a waveguide.

z

710 W AES / 1400 W continuos

131 dB nominal / 137 dB continuous

g

LF: 8 Ohm / HF: 16 Ohm

30 Kg

The exceptional scalability and the ability to form small arrays of two, three or four cabinets with strict control of dispersion makes A.L.I.S. 12 capable of adjusting to any audience geometry, being the ideal choice for distributed systems in sports venues. Arrays can be flown horizontally or vertically, or stacked when needed.

A.L.I.S. 12 show no angle settings to calculate or spread adjustments to implement for each show, as these is already fixed. Tecnare’s DP4896 and DP2696 processors provide presets for A.L.I.S. 12 arrays to quickly optimize your system. With the Ease Focus 2 acoustical prediction program you can create accurate acoustic simulation..

A.L.I.S. 12 offer unbeatable audio performance for all kind venues, where polar control, high-output, lowdistortion, and the highest quality sound are required. Constructed of premium WISA birch plywood, A.L.I.S. 12 enclosure are covered with a hard-shell finish coating. Rigging is made out of aluminum to lower weight and optimize weatherization.

A.L.I.S. 12 can be sold in passive version.

Features

  • Exceptional size-to-power ratio; easily powerful enough to use for main system, delay stacks, or fill duties
  • 1 x 12-inch-LF cone driver / 1 x 1.4-inch exit (3-inch voice coil) HF compression driver coupled to a waveguide
  • Plug-and-play package, quick set-up and easy flying

Applications

  • Theatres and theatrical sound reinforcement
  • Stand alone system
  • Center and Sidefill applications
  • Concert Halls, distributed systems and clubs

Frequency Response:                                                    55 Hz – 20 kHz ±4dB, measured on axys

Components:                                                                   1×12” neodymium LF driver, 3” voice coil, 1×1.4’’ exit compression driver

Nominal Dispersion:                                                     20º x 75° @-6dB

Impedance:                                                                      LF: 8 Ohm / HF: 16 Ohm

Axial Sensitivity:                                                            104 dB

Calculated SPL:                                                              131 dB nominal / 137 dB continuous

Power Handling:                                                            710 W AES / 1400 W continuos

                                                                                            – LF power: 600W AES @8ohm

                                                                                            – HF power 110W AES @16ohm

Dimmensions (HxWxD) (millimeters/inches):       654,5 x 388 x 582,6 mm / 25.77″ x 15.27″ x 22.94″

Net Weight (kg/Pounds):                                             33,5 Kg / 73.85 lbs

Construction:                                                                 16mm birch plywood. Finished in black semi-matt textured Polyurea weatherized coating. One recessed by side carrying handle.

Grille:                                                                                Powder coated perforated steel with acoustically transparent reticulated foam.

 

Optional passive crossover network

Accesories:

◊Colors Versions:

-White color

-Black color

◊Pickup plate: THV-ALIS12

◊Pickup plate: THF-ALIS12 Array frame for 2 units

◊Top Grid: TTG-ALIS12

◊Shocket mounting bracket TA12-SMB

◊Wooden dolly TWD-ALIS12

◊TecB004 Load Spreader Bar

◊Soft Cover for ALIS12

R

Theatres and theatrical sound reinforcement

R

Stand alone system

R

Center and Sidefill applications

R

Concert Halls, distributed systems and clubs